The Odor Stop® filter contains a proprietary
zeolite mineral blend enclosed in a breathable pouch.
The pouch is housed inside an aluminum bracket. As air moves though the
filter, odors, pollutants, allergens and gases are adsorbed by the zeolite
minerals giving you improved indoor air quality.
Commercial Air Conditioners (A/C)
The Odor Stop® filter is installed behind the air intake filter. 10 and
20-lb. filters are available. A 10-lb. filter can handle up to 2.5 tons of
A/C. A 20-lb. filter can handle up to 5 tons of A/C. The dimensions of the
10-lb. filter are: L15" X H12" X W3". The dimensions of the 20-lb. filter
are: L30" X H12" X W3". To determine the number of filters required, first
check the tonnage of the A/C and then check the dimensions of the air intake
vent. If the air intake vent can't support the 20-lb. filter, use 10-lb.
filter. Divide the tonnage of the A/C by 2.5 if using the 10-lb. filter and
by 5 if using the 20-lb. filter and round up to the next whole number to
determine the number of filters required.
10-lb. Odor Stop Filter
20-lb. Odor Stop Filter
PTAC (Portable Thermal Air Conditioner)
PTAC units are commonly found in hotel and motel rooms. They provide a
guest with heating and A/C. The Odor Stop® PTAC filter installs
underneath the PTAC unit. The dimensions of the PTAC unit are L23" X H4.5"
X W3". One PTAC filter is required for every PTAC unit.
Odor Stop PTAC Filter
Lasts Forever
Odor Stop® filters are a one-time purchase. If properly maintained,
Odor Stop® filters never wear out and never need to be replaced.
Zeolites are characterized by the ability to adsorb and lose water and
gases without damaging the crystal structure. Zeolite minerals never wear out.
Maintenance
Every 12 months, wash the Odor Stop® filters with soap and water, rinse
with water, shake dry and re-install.
