The Flower Power filter contains a proprietary zeolite mineral blend enclosed
in a breathable pouch. The pouch is encased in an aluminum bracket. As air
moves through the Flower Power filter, the zeolite minerals maintain an ideal
humidity level and eliminate ethylene gas.
The Flower Power filter is installed behind the cooler evaporators. 10 and
20-lb. filters are available. A 10-lb. filter can handle up to 500 cubic feet.
A 20-lb. filter can handle up to 1,000 cubic feet. The dimensions of the
10-lb. filter are L15" X H12" X W3". The dimensions of the 20-lb. filter are
L30" X H12" X W3". To determine the number of filters required, divide the
cubic footage by 500 if using the 10-lb. filter and by 1,000 if using the
20-lb. filter and round up to the next whole number.
10-lb. Flower Power Filter
20-lb. Flower Power Filter
For reach-in coolers, the Flower Power Brick is available. One brick can
handle up to 100 cubic feet. The dimensions of the Flower Power Brick are
L7.5" X H4.75" X W3".
Flower Power Brick
Lasts Forever
Flower Power filters are a one-time purchase. If properly maintained,
Flower Power filters never wear out and never need to be replaced.
Zeolites are characterized by the ability to adsorb and lose water and
gases without damaging the crystal structure. Zeolite minerals never wear
out.
Maintenance
Every 12 months, dry out the Flower Power filters in the sun for 8
hours or bake the filters in an oven at 120 degrees for 2 hours. The heat
dries out the filter and releases the moisture and gases that have been
adsorbed.
